Garland TEXEL 389 QG, Instruction Manual

Page: 34 / 156

English
34/148
Warning labels indicate required information for the
use of the machine.
In order to ensure safe operation and maintenance of
the machine are the following symbols in the machine.
Air positions:
Advertencia y cuidado.
Attention!, Danger!: The cutting tool can
project hard objects.
Be careful don’t hit with any object when
turning
Caution! Hot Surface.
Do not smoke or bring a flame to the
combustible or the machine.
3. WARNING SYMBOLS
4. MACHINE SYMBOLS
Sense of rotation.
Open = Normal operating position.
Located in the top of the filter.
Open = Normal operating position.
Located in the top of the filter.
Position for starting the machine in cold.
Located on the of air filter cover.
Position for starting the machine in cold.
Located on the of air filter cover.
Positions start switch located on the right
handle of the machine.
“O” = Off (The machine don´t work)
“I”= On (The machine is ready to work)
STOP -
0
START -
I
Do not let people enter in the
work area. This area will be of a
diameter of 15 meters from the
point in which you are working.
360º
Complies with EC Directives.
Guaranteed level of sound power Lwa,
Db(A).
XX
It is necessary to read this manual
carefully before using this machine.
Attention!: Do not touch the cutting blade.
Caution! Maximun speed of gear
XXXX min
-1
.
Use protective non skid boots with
protective steel.
Use appropriate security gloves.
It is necessary to use eye protection at
any time.
It is necessary to use acoustic protection
at any time.
Attention!, Danger!: The cutting tool
can project hard objects.
Oil tank
Fuel tank
Always check the crankcase oil
level before starting. Capacity: 0,1
litres. Multigrade oil 10W-40.