196cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
(toll free)
MODEL No.: SLM462 • 03/2019 63158
e-mail: [email protected]
AUS
30
1300 889 028
AUS
engine speed is at its lowest, side discharge or mulching (no catcher) is
recommended.
Manual start (See Fig. K1, K2)
1) Push the engine variable speed control (20)
upwards towards the handle bar, to the highest
position (See Fig. J1)
2) Pull the start bar (2) upwards towards the
upper handle (4) bar and keep it in position for
starting the lawn mower and when the lawn
mower is in use.
3) Stretch the recoil starter (9) and loop it through
the recoil starter (9) wire holder (18) to fix into
position.
4) Firmly hold the recoil starter (9) and pull it
out from the recoil starter (9) wire holder (18)
rapidly to crank the engine.
5) To increase the engine speed, press down the
engine variable speed control (20) towards the
engine, to a higher speed position.
WARNING:
To prevent damage never pull the recoil starter (9)
when the engine is running.
NOTE:
The start bar (2) must be held firmly against the foam grip
handle bar to both start the engine and to keep the engine running.
Releasing the start bar (2) will stop the engine.
NOTE:
When the engine speed is at its highest, it is recommended for
catcher mowing. When the engine speed is at its lowest, side discharge
or mulching (no catcher) is recommended.
2. STOPPING THE ENGINE
1) Push the engine variable speed control (20) upwards towards the
handle bar, to the highest position, which is the lowest speed
setting.
2) Release the start bar (2) to stop the engine and wait until the engine
is fully switched off.
K1
K2
Operation
