196cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
(toll free)
MODEL No.: SLM462 • 03/2019 63158
e-mail: [email protected]
AUS
24
1300 889 028
AUS
mower.
1) Raise the rear discharge guard (7) and hold it
up. Remove the catcher (17), and then insert
the mulching block into the rear chute by lining
up the rectangle tab on the bottom of the
mulching block (37), with the rectangle slot
on the bottom of the rear chute. Ensure the
mulching block (37) is secured into position .
(See Fig. D1)
2) Press the locking button (b) to release the side
ejector cover (12). (See Fig. D2)
3) Raise the side ejector cover (12) and place the
side discharge chute (13) onto the side of the
deck of the lawn mower, aligning the 2 top tabs
on the side discharge chute (13) with the bars
on each side at the top of the side ejector cover
(12), and then place the 2 top tabs underneath
the bars to secure. (See Fig. D3)
4) Release the side ejector cover (12).
5) To remove the side discharge chute (13), raise
the side ejector cover (12), and remove the side
discharge chute (13). Lower / release the side
ejector cover.
BEFORE OPERATION
CAUTION!
The following procedures and adjustments
must be performed before the engine is
started. Do not attempt to make any of these adjustments when the
engine is running.
1. BATTERY CHARGING (SEE FIG. E1, E2)
Battery Charging
This lawn mower is equipped with electric start and uses ALDI Xfinity
Plus 20V powered batteries to start the product. All Xfinity Plus 20V
batteries are compatible with this lawn mower.
The charger provided with this product is a standard charger.
D1
D3
D2
b
Assembly
