196cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
(toll free)
MODEL No.: SLM462 • 03/2019 63158
e-mail: [email protected]
AUS
27
1300 889 028
AUS
running or is hot.
●
Fuel is highly inflammable and extreme
precaution must be taken when handling
or working with it. Keep out of reach of
children. Do not smoke when refueling.
●
Ensure you DO NOT fuel the lawn mower
in close proximity to any open flames, lit
cigarettes, or hot objects.
●
DO NOT use Ethanol based fuels. Do NOT
mix oil with fuel.
●
Be careful not to admit dust, dirt, water or
other foreign objects into the fuel.
●
Wipe off spilt fuel thoroughly before starting engine.
NOTE:
Fuel should be stored in an approved container. Never buy or
store more than 30 days supply of fuel. Do not mix oil with fuel.
1) Open the fuel tank lid (8) by turning it 90 degrees to the left and
pour fresh unleaded fuel into the tank with the aid of a funnel.
2) Fill the tank to approximately 2.5 cm below the lowest portion of the
neck to allow for fuel expansion. Be careful not to over fill or spill
any fuel. If this happens, wipe the spill with a clean rag.
3) When securing the fuel tank cap (8), align the corresponding notch
between the cap and fuel tank (see Fig. G2).
4) Start the engine at least 3 metres away from the area where the fuel
tank has been filled in order to avoid the risk of fire.
WARNING!
Misplace the notch will damage the fuel tank notch
fitting.
4. ADJUSTING THE CUTTING HEIGHT (See Fig. H)
WARNING! Stop the engine, and wait
for blade to come to a complete stop.
The blades continue to rotate after the
machine is switched off, a rotating blade can
cause injury.
The lawn mower has one cutting height
adjustment lever to easily adjust the cutting
height. There are 7 height settings.
Assembly
H
G2
One
tab
two
tabs
two notches
One notch
