196cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
(toll free)
MODEL No.: SLM462 • 03/2019 63158
e-mail: [email protected]
AUS
23
1300 889 028
AUS
catcher (17).
NOTE:
Ensure to remove the mulching block if
it is in the rear chute. (See Fig. C1)
2) Pick up the catcher (17) by the handle and
position the hooks on each side of the catcher
onto the rod on each side of the rear discharge
chute (7). (See Fig. C2)
3) Release the rear discharge guard (7). Ensure the
catcher (17) is installed securely. (See Fig. C3)
4) To remove the catcher (17), raise the rear
discharge guard (7), and whilst holding it up,
lift the catcher (17) by the handle to remove
the catcher hooks from the rods on each side of
the discharge chute.
WARNING!
Before you carry out any repairs
or servicing work on the mower, you must
ensure that the lawn mower is turned off, the
blade is not turning, and that the spark plug cap
is disconnected and moved away from the spark
plug.
The lawn mower should not be operated without
either the catcher (17) or the rear discharge guard
(7) in position.
NOTE:
●
Always empty the catcher (17) before it has
reached its maximum capacity.
●
Do not leave grass clippings in the catcher (17)
for extended periods of time.
4. ASSEMBLY OF THE SIDE DISCHARGE CHUTE (See Fig. D1- D3)
WARNING!
Ensure the engine is NOT operating when fitting the
side discharge chute.
NOTE:
The side discharge chute (13) is used to distribute grass clippings
from the side of the mower while the mower is in use. To use this
function, the catcher (17) is NOT required to be assembled on the lawn
Assembly
C2
C3
C1
37
