Gardena ErgoJet 3000, Operating Instructions Manual

Page: 17 / 356

2. Safety instructions
WARNING:
This unit can
be dangerous! Careless or
improper use can cause
serious injury.
Read the user instructions
carefully to make sure you
understand all of the controls
and what they do.
Do not expose to rain.
Do not leave the product
outdoors while it is raining.
Switch off! Remove plug
from mains before adjusting,
cleaning or if cable is
entangled or damaged.
The use of eye and ear
protection is recommended.
Keep bystanders
away.
v
Please note the safety instructions on the ErgoJet 3000 (EJ3000).
General Power Tool Safety Warnings
WARNING
: Read all safety
warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
Save all warning and instructions for future
reference. The term “power tool” in the
warnings refers to your mains operated (corded)
power tool.
1) Work area safety
a) This product is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or instruc-
tion concerning the use of the product by
a person responsible for their safety. Children
should be supervised to ensure that they do
not play with the product. Local regulations
may restrict the age of the operator. Never
allow children or people unfamiliar with these
instructions to use the product. Power tools
are dangerous in the hands of untrained users.
b) Never operate the product while people,
especially children, or pets are nearby.
Distractions can cause you to lose control.
c) Never blow debris in the direction of
bystanders. The operator or user is responsible
for accidents or hazards occurring to other
people or their property.
d) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
e) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite
the dust or fumes.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adaptor plugs with earthed (grounded)
power tools. Use only on AC mains supply
voltage shown on the product rating label.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Before use, examine
cord for damage. Replace cord if there
are signs of damage or ageing. Do not use
the product if the cord is damaged or worn.
Immediately disconnect from the mains
electricity supply if the cord is cut, or the
insulation is damaged. Do not touch the
electric cord until the electrical supply has
been disconnected. Do not repair a cut or
damaged cord. Replace it with a new one.
Damaged or entangled cords increase the risk
of electric shock.
17
GB
9332-20.960.01.indd 17 04.01.12 07:47