GARANT GMT35, Instruction Manual

Page: 30 / 168

de
en
cs
da
es
fr
hr
hu
it
nl
pl
ro
sl
GARANT GMT35 Surface finishing machine
Select Cancel
3x5
2
4
PL
PO
*
CE
Select Chips
3
1 Select the type of abrasive chips:
Ceramic (CE),
Plastic (PL),
Porcelain (PO),
User-defined (*)
Or create a new category.
2 Select a pre-defined abrasive chips form or create a new
special form.
3 Select a pre-defined abrasive chips size or create a new spe-
cial size.
4 Load selection.
7.6.4. Perform separation
2000 rpm
10 h 30 min
PB40
Manual Mode
Open the chip outlet before continuing
ü
Motor stopped.
1. Press separate.
2. Follow the instructions for the screen and for the section
“
Concluding work [
}
Page 28]
”.
3. Confirm separation process.
8. Settings
Settings
General
Control Center
Compound Selection
Remote Update
Shut Down
1
2
3
4
5
1  Adjust the screen
brightness
 Select the display lan-
guage
 Reset to factory set-
tings
 Display operating
hours
4 Perform remote update
2 Check the status of indi-
vidual components, error
messages
5 Switch off the surface fin-
ishing machine
3 Select, edit and create compounds
8.1. GENERAL
1
2
3
4
5
1 Select the display language
2 Set the date/time
3 Display the operating hours
4 Adjust the screen brightness
5 Remote Update
8.1.1. Adjust the screen brightness
100 %
Adjust the screen brightness using the slider or button.
8.1.2. System language
English Chinese Russian
German
To load the desired display language, click on the respective flag.
8.1.3. Reset to factory settings
Factory Reset
Factory Reset
Performing a factory reset will delete all programs and
custom chips saved to the machine, and restore
default settings. This action can NOT be undone. Are
you sure you want to perform a factory reset?
Press Reset to factory settings then confirm.
30