48
49
GAP Diagnostic 2023-09-12 All Rights Reserved
User Manual G3 units : Version 37, Firmware V4.0
CAUTION
Some tasks cannot be performed with the engine running. When
required, the following message will be displayed on the screen
“Start the engine”.
These tasks should be carried out outside to avoid the risk of
Carbon Monoxide poisoning!
2.8 General operation of the IIDTool
This section describes how to connect the IIDTool to the vehicle, various control interfaces for naviga
-
ting through menus and finally proper disconnection of the tool.
2.8.1 OBDII Port location
Figure 21.
OBDII Connector, All except L322 2002-2006 and L316
àà
All except Range Rover L322 2002-2006 and
Defender L316
The OBDII port is located near the pedals, close
to the driver’s door.
