122
123
GAP Diagnostic 2023-09-12 All Rights Reserved
User Manual G3 units : Version 37, Firmware V4.0
•
Release both buttons simultaneously.
•
Repeat steps 1 and 2 for all other available keys.
Add a key
(VIN Locked L322-10, L319-10, L320-10, L538, L359 2013+)
This routine is used to add one (1) new key to the vehicle. It will not remove previously programed
keys.
Instructions
An already programed key is needed to begin the procedure. Instructions will be displayed on screen.
When prompted, press and hold the unlock button of the remote. Pressing the unlock button will be
done a few times in a row to complete all programming steps. The horn will be activated during the
procedure.
Note :
•
A used key can be programed to a vehicle. Once programed, it will no longer work on the pre
-
vious vehicle. The emergency start (dead remote battery) will not work on the new vehicle.
•
Both key models (slim and bigger one) can be programed on any model and year.
•
Later L494 and L405 in certain regions have been locked and key programming cannot have a
key added. The KVM needs to be replaced at a Jaguar Land Rover dealer.
•
If upon programing the process fails with
Error E7
, please contact us for assistance. This will
occur on certain KVM firmware version. Keys can be programed but the process requires us to
provide a file to relfash the KVM.
•
Cheap Chinese or keys with the wrong frequency will not work.
•
Remote key plips frequency will vary depending on market.
-433 MHz Europe, Asia, Oceania, UK, UAE and more
-315 MHz America, rest of the world
Make sure to order the correct key for your car/market.
