24
GAP Diagnostic 2023-09-12 All Rights Reserved
User Manual G3 units: Version 37, Firmware V4.0
1.6 Supported vehicles/platforms
Covered vehicles are those for which the IIDTool
BT
and IIDTool
Pro
have been designed. This list is
updated as required.
Instructions found In this manual will sometimes be detailed separately depending on the vehicle
model and even the Model Year of covered vehicles (see definition below).
To lighten the text, electronically similar vehicles will be grouped as “Referent Model Code”. Jaguar
Land Rover platform codes are matched with a suffix representing a range of Model Years where spe
-
cific features are presented.
To identify the referent model, please consult the table found on next page, having taken care to cor
-
rectly identify previously, however, the Model Year.
1.6.1 Model Year Identification
The Model Year is an approximate description of the production time of a vehicle in terms of its speci
-
fications or design revisions.
Note
:
The Model Year does not coincide systematically with the calendar year at which the vehicle
was manufactured (listed on the driver door B pillar sticker or on the certificate of registration).
You can confirm the model year of a vehicle by checking the 10th character of the Vehicle Identification
Number (VIN). It is located at the bottom of the windshield, driver’s side and analyzed as follows:
Model Year
10th Character of the VIN
Years interval
Signification
Numbers,1 to 9
200
1
-200
9
“ 1 ” for 2001
...
9 for 2009
Letters
20
10
and up
“ A ” for 2010
“ B ” for 2011
...
the letters i (I), o (O) and
q (Q) are not used (skip
-
ped) to avoid confusion
Table 6.
Determining a vehicle Model Year using the VIN
