154
155
GAP Diagnostic 2023-09-12 All Rights Reserved
User Manual G3 units : Version 37, Firmware V4.0
4.10 Function “ Car Configuration ”
WARNING
The IIDTool allows changing of vehicle settings to a state out-
side of the original manufacturer specification.
It is the sole
responsibility of the user
to choose secure settings for the
applicable use of the vehicle.
As with any diagnostic tool, there is always a risk of failure
when writing data on an ECU. Writing the CCF should only be
done when the vehicle is not needed immediately afterwards.
Access to the Internet in case support is needed is highly re-
commended.
If the CCF update fails and your IIDTool can
no longer be used, please consult the recovery instruc-
tions.
4.10.1 Definition
The car configuration menu allows users to make changes, improve or upgrade software functions
supported by the vehicle. Please consult the functionality list on the IIDTool’s webpage to know which
configurations are available for your vehicle. For example:
•
Installing a rear-view camera will require a configuration change in order for the image to appear
on the navigation display.
•
Activate the day time running light options (DRL).
Note :
Only a limited number of systems allow configuration changes. For a tested list, check out the
functionality list on the IIDTool webpage
https://www.gap-diagnostic.com/support/documents/IIDTool/
.
And our FAQ:
https://www.gap-diagnostic.com/faq/
On vehicles converted to Liquid Propane Gas or LPG, the system must be deactivated (swit
-
ched to Petrol) before attempting to change the CCF, else the IIDTool will not be able to read
the CCF.
Accès
1- Perform the initial stages of access (
)
2- Select “Car Config” function
3- Navigate through the ECUs using commands
4- Select the desired ECU
5- Select and modify desired settings
6- Follow instructions to upload changes to the vehicle.
