126
127
GAP Diagnostic 2023-09-12 All Rights Reserved
User Manual G3 units : Version 37, Firmware V4.0
Actuators end stop detection (2017+)
Required when the HVAC ECU is replaced.
4.7.11 Steering Lock (L359)
Initialization
This routine is used when the steering lock ECU is replaced.
4.7.12 All ECUs
Vehicle Reset
(L322-10, L319, L320)
This routine will send a reset or reboot command to all ECU’s. It is equivalent to a soft reset.
Usage
On L319-04, it should be used to restore the clock on the instrument pack ECU (--:-- displayed). It can
also be used to solve other unusual issues.
Note
:
This function will return all user settings (radio station, etc) to factory default.
4.7.13 10AS
(L316)
Remote programming (VIN locked)
Preparation
•
Ensure all remotes currently and to be programed are available.
•
Ensure the vehicle is unlocked.
•
All the doors, including the boot, must be closed.
•
It is recommended to sit inside the vehicle with all the doors closed whilst this procedure is
performed.
Instructions
•
Select New for 2013+ vehicles.
•
Select Old for 2007 to 2012 vehicles.
•
Follow instructions on screen.
•
Always program a new unprogrammed remote or an already programed remote that was not
used to unlock the car for this ignition cycle or session first.
•
Finish with the remote that was used to unlock the car for this specific session.
Renew security ID between and 10AS
Usage
This operation is used when the 10AS ECU is replaced.
