9.13.
Ethernet interface setup
Available setup:
MAC address - Information only. Ethernet MAC address. Cannot be changed.
DHCP - Selects DHCP client on and off.
IP address - Configures Ethernet IP address.
Subnet mask - Configures Ethernet subnet mask address.
Gateway address - Configures Ethernet gateway address.
Link state - Information only.
Supported protocols:
Gamma protocol (running on TCP port 23)
Modbus TCP protocol (running on TCP port 502)
NOTE:
Modbus register map is available on Gamma Vacuum website under download
section.
Figure 16. Ethernet setup screen
9.14.
TSP sublimation view
First text line indicates current TSP status. Here ‘TSP 1 OFF’.
Second text line indicates current TSP configuration as defined in the TSP
Setup window.
Third text line indicates currently active TSP filament. This is the filament
that will be sublimated.
Available TSP status:
‘TSP Initializing’ - TSP is initializing.
‘TSP OFF’ - TSP is off.
‘TSP ON’ - TSP is currently sublimating.
Page 27
900034_C
900034_C - Touchscreen user interface
