IF 632 Installation and Operation Manual
Release: 3 01/31/01
96
PROGRAMMING MODE
Main Display
The main programming display shows the user an overview of the programming modes.
The user is allowed to select from four categories. (Figure 6)
Programming Mode
1=Ckt. Prog. 2=CBE
3=Function 4=System 0=Exit
>
Figure 6
1= Ckt Prog
Circuit Programming
2 = CBE
Control-By-Event
3= Function
System Test/Bypass
4 = System
System Wide Programming
0= Exit
Exit
PROGRAMMING MODES
TABLE P1
Circuit Programming
Select "Ckt Prog" from the main "Programming Mode" menu to modify input/output
device characteristics (e.g. zone type, group assignment, signal code and device
specification text). (Figure 7)
Circuit Programming
1=Inputs 2=Outputs 3=Init. 0= Exit
Figure 7
"Inputs" Circuit Selection
1. From the Circuit Programming menu, Press [
1
] on keypad.
2. Press
"
Enter
".
>>
NOTE: The cursor will be flashing under the circuit
number. If the device type is an ion detector Figure 8 will
be displayed.
Ckt:XX Add:XXX D_Type: Ion Z_Type: XXXX
I
_GRP:XXX
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
