IF 632 Installation and Operation Manual
Release: 3 01/31/01
112
SYSTEM PROGRAMMING
Programming
System programming menus may be accessed if the proper programming password is
entered at the “ENTER PASSWORD:” prompt.
Programming may also be performed from a laptop computer connected to the RS-232 port
on the CPU of the control panel. Refer to the end of this section for instructions.
>>
NOTE: Before proceeding, notify all personnel, monitoring
companies and municipalities the system will be
temporarily "out of service". During all levels of
programming, the system will be in an off-line status.
System Menu
The “System Menu” menu is displayed when selected from the programming mode menu.
System Menu
1=Display 2=Change 3=Test
0=Exit
Display Menu
Selecting the “Display” option from the “System Menu” which allows the user to display or
download various system parameters. There are four options that may be selected from this
menu (see Figure 5-2) and four options that may be selected from the “MISC.” menu
selection. (Figure 5-3).
Display Menu
1=Config 2=Dict 3=Events
4=Misc 5=Detectors 0=Exit
Config Menu
The Configuration Menu allows the user to select either displaying the system module
configuration or downloading the entire system configuration.
Configuration Menu
1=Display 2=Download 0=Exit
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
