IF 632 Installation and Operation Manual
Release: 3 01/31/01
79
Input Test
The Input test function allows the user to individually test the functionality of
each device, operation and response.
Device LED will illuminate if selected for Input Test. The LED will turn off
when the device is deselected.
Function Programming
1=Walk Test 2=Bypass 3=Input Test
4=Output Test 5=Display 0=exit
>3
Figure T2
1. Press
“
3
” and then “
Enter
”
2.
Figure T3 is now displayed.
CKT:XX Add:XXX D_Type:XXX Counts: XX
Figure T3
CCT
Circuit of selected device (1-4)
Add:
Address of the selected device
D_Type
Device type (
see table P3 in programming
section)
Counts
Real time analog value
3. Use the up/down arrow keys to scroll through the connected devices. When the device
address is selected, the device type and real time analog value will be displayed
automatically.
4. Determine the functionality and operating response of the Detector using the following table.
5. To exit the Detector Test Mode press the Enter key at any time.
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
