Galvanic Applied Sciences ProTech903, Operation Manual

Page: 90 / 190

Revision 14
90 August 02, 2019
5.7.3 Filtering Data
The data table can be filtered to show only certain data by clicking on the funnel ( ) icon in
the header in any column (except the Log Name column). Data can be filtered by date in the
timestamp column, and by using one of six numerical operators in any column containing
numerical data. The two types of filtering will be covered separately.
5.7.3.1 Filtering Data by Date
Clicking on the funnel icon on the right hand side of the Timestamp column header will
present a pull-down menu that contains the following options:
•
All - Selecting
All
will turn off any current filtering of data by date.
•
Custom - Selecting
Custom
will present the dialog box shown in Figure 5-14 which allows
the user to choose a date range for the data that they wish to display, starting at a certain
date and ending at a certain date.
Figure 5-14: Date Sorting Selection Dialog Box
•
Today - shows only data obtained on the current date.
•
Yesterday - shows only data obtained yesterday.
•
This Month
- shows only data obtained in the current month.
• Last Month - shows only data obtained in the previous month.
The date and time must be correctly set on the system for this filtering to
work correctly, as the timestamp on each row of data is obtained from the
analyzer’s internal clock.
5.7.3.2 Filtering Data Numerically
In the header of the column to be filtered, clicking on the funnel icon on the right hand side of
the header will cause a pull down menu to appear. The menu contains the options All and
Custom
. As before, selecting
All
will cause any current numerical filtering of data to be
cleared. Selecting
Custom
will bring up the dialog box shown in Figure 5-15.
Figure 5-15: Custom Numerical Filtering Dialog Box