Galvanic Applied Sciences ProTech903, Operation Manual

Page: 15 / 190

Revision 14
15 August 02, 2019
1.6 Contents of this Manual
This manual contains the following information:
• Section 1:
ProTech903 H
2
S and Total Sulfur Analyzer
presents introductory information
about the system and the mode of operation.
•
Section 2:
Analyzer Components
describes the design of the major components of the
system.
• Section 3 : Installation describes unpacking the analyzer, installing it in the facility and
interfacing with other devices.
•
Section 4:
Operating the System via the Handheld Keypad
describes how the user enters
data and views system parameters using the hand held controller module and on board
display panel
•
Section 5:
Graphical User Interface (GUI)
presents a detailed discussion of the various
aspects of the application program on the personal computer.
• Section 6 : Operating the System describes how to set up the system to perform analyses.
• Section 7:
Maintenance
includes a discussion of activities which should be performed on a
routine basis to optimize operation
•
Section 8:
Troubleshooting and Service presents information that is useful in diagnosing
problems with the analyzer and describes how various components are replaced.
•
Section 9:
Analyzer Q.C. Documentatio
n includes the test documentation material used to
test the analyzer
•
Section 10:
ProTech903 H
2
S Analyzer Wiring Book
includes diagrams to assist the
operator in interfacing auxiliary components such as relays, solenoids, etc. to the controller
module.
•
Section 11:
Technical Specifications
presents the specifications for the analyzer.
•
Section 12:
Spare Parts lists a number of items which may be required to maintain
operation of the analyzer.