Gallet Saint Tropez, Instruction Manual

Page: 42 / 60

IV. MAINTENANCE
Unplug the appliance from el. outlet before any handling with the appliance! Do not
use any rough and abbrasive cleaning agents! Clean the base unit with a damp cloth
and soap. Clean all screens immediately after use in hot water with soap. Some foods may
discolor the screens. This has, however, no effect on the functions of the appliance and
this discoloration will usually disappear with time. Never dry the plastic die-cast over a heat
source (e.g. stove, el./gas cooker ).
V. TECHNICAL DATA
• Food dehydrator
• Suitable for fruits, vegetables, mushrooms and herbs drying
• Variable temperature control 35 °C - 70 °C
• 5 stackable drying racks (Included)
• Clear trays and lid, enable easy control of the drying process
• Can be expanded to 10 drying racks
• Depending on the amount of food the no. of racks can be chosen
• Additional drying racks can be bought
• 33 cm diameter plates
• Input 245 W
• Protection against overheating
• Acoustic noise level of 60 db (A)
• Size: 32.5 x 25 x 32.5 cm
• Weight netto 2.5 kg
Input in off mode is 0.00 W.
VI. LEGISLATIVE & ECOLOGY
The product has received ES declaration of conformity according to Act as amended. The
product matches the requirements of the below statutory order as amended.
– Committee Regulation No. 2006/95/ES as amended, setting the technical requirements
of the electrical appliance as low.
– Committee Regulation No. 2004/108/ES as amended, setting the technical requirements
of products in terms of their electromagnetic compatibility.
The product is in conformity with the European Parliament and European Committee
Regulation No. 1935/2004/ES re. Materials and objects designed for contact with food.
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by professional service! Failure to comply with
the instructions of the manufacturer will lead to expiration of the right to guarantee
repair! The manufacturer reserves the right to make insignificant changes to the
standard design that do not affect the function.
EN - 43 EN - 42