Furuno GP-3700F, Operator'S Manual

Page: 208 / 224

APPENDIX 1 MENU TREE
AP-8
3. FUNC. KEY/ F1 KEY (WAYPOINT LIST, ROUTES LIST, SAVE USB MEMORY, READ USB MEMORY,
RCU SETTING INTERNAL MEMORY RECORDING, INTERNAL MEMORY PLAYBACK,
TRF USB TO INT MEMORY, DISPLAY INTERNAL MEMORY, MARK LINE TYPE,
DISPLAY AIS TRACK, DISPLAY CNSRT TRACK, DISPLAY TT TRACK,
DISPLAY GPS BUOY TRK, EDIT MARK, DELETE MARK, INPUT MARK, EDIT TRACK,
DELETE TRACK, DELETE ALL TRACK, ALARM SETTING, NAV AIDS DISPLAY,
CONTOUR LINE DISPLAY, RESET TRIP LOG, DELETE OTHER SHIPS’ TRACK,
SCREENSHOT, REDO , CHANGE OPERATION DISPLAY, FISH FINDER SHIFT,
FISH FINDER DEPTH RANGE, FISH FINDER GAIN, FISH FINDER AUTO,
FISH FINDER INT REJ, FISH FINDER CLUTTER, FISH FINDER WHITE MARKER,
FISH FINDER HUE, FISH FINDER SIGNAL LEVEL, FISH FINDER PIC. ADV.)
F2 KEY (Same as F1 KEY.; SCREENSHOT )
SHIFT KEY (Same as F1 KEY.; FISH FINDER SHIFT )
RANGE KEY (Same as F1 KEY.;
FISH FINDER DEPTH RANGE
)
GAIN KEY (Same as F1 KEY.; FISH FINDER GAIN )
RCU KEY A (No use.)
RCU KEY B (No use.)
4. DISPLAY 1 (to 5). DISPLAY 1 (to 5) SETTING
SETTING SPLIT PATTERN ( NO SPLIT , VERT SPLIT 1:1, VERT SPLIT 1:2, VERT SPLIT 1:3,
VERT SPLIT 2:1, VERT SPLIT 3:1, HOR SPLIT 1:1, HOR SPLIT 1:2,
HOR SPLIT 1:3, HOR SPLIT 2:1, HOR SPLIT 3:1, THREE-WAY SPLIT)
DISPLAY SCREEN* ( PLOTTER DISPLAY , 50kHz SINGLE DISP, 50kHz A-SCOPE SINGLE DISP,
50kHz MARKER ZOOM DUAL DISP, 50kHz BOTTOM ZOOM DUAL DISP,
50kHz BOTTOM LOCK DUAL DISP, 50kHz BOTTOM DISC DUAL DISP,
200kHz SINGLE DISP, 200kHz A-SCOPE SINGLE DISP,
200kHz MARKER ZOOM DUAL DISP, 200kHz BOTTOM ZOOM DUAL DISP,
200kHz BOTTOM LOCK DUAL DISP, 200kHz BOTTOM DISC DUAL DISP,
50kHz/200kHz VERT DUAL DISPLAY, 50kHz/200kHz DUAL DISP A-SCOPE,
50kHz/200kHz HOR DUAL DISPLAY, MIXED DISPLAY)
NAV/DEST INFO
SELECT INFO ( INFO1 , INFO2)
INFO DSP POS ( UPPER SIDE , LOWER SIDE, WITHOUT)
6. DISPLAY CHANGE SETTING
DISPLAY 1 ( DISPLAY )
DISPLAY 2 (to 5) ( DISPLAY , SKIP)
7. NAVIGATION INFO. 1 SETTING (Select from PATTERN LIST and NAV DATA.)
8. NAVIGATION INFO. 2 SETTING (Select from PATTERN LIST and NAV DATA.)
9. WAYPOINT INFORMATION 1 SETTING (Select from PATTERN LIST and NAV DATA.)
0. WAYPOINT INFORMATION 2 SETTING (Select from PATTERN LIST and NAV DATA.)
5. INPUT/ 1. PORT 1 SETTING
OUTPUT CONNECTED DEVICE ( NORMAL , RADIO EQUIPMENT, AIS, GPS BUOY, AUTO PILOT, RTCM)
PORT SETTING FORMAT ( NMEA0183 ver1.5 , NMEA0183 ver2.0, NMEA0183 ver3.0, NMEA0183 ver4.1)
BAUD RATE (4800, 38400 )
TLL OUTPUT ( ON , OFF)
LAT/LON FORMAT (DD°MM.MM’, DD°MM.MMM’ , DD°MM.MMMM’)
OUTPUT WAYPOINT (ON, OFF )
OUTPUT CONSORT INFO.* (ON, OFF )
OUTPUT RADIO MESSAGE* (ON, OFF )
DATUM SELECTION ( WGS-84 , TOKYO)
2. PORT 1 OUTPUT SENTENCE (Select OUTPUT or NO OUTPUT for each sentence.)
3. PORT 2 SETTING (Same as PORT 1 SETTING.)
4. PORT 2 OUTPUT SENTENCE (Select OUTPUT or NO OUTPUT for each sentence.)
5. PORT 3 SETTING (Same as PORT 1 SETTING.)
6. PORT 3 OUTPUT SENTENCE (Select OUTPUT or NO OUTPUT for each sentence.)
7. ETHERNET SETTING
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
FA-30 IP ADDRESS
8. SHOW NMEA2000 DEVICES
9. NMEA2000 PGN (Select OUTPUT or NO OUTPUT for each PGN.)
2
2
*: Options change
depending on
selected SPLIT
PATTERN.
*: No use.