Furuno GP-3700F, Operator'S Manual

Page: 144 / 224

10. HOW TO RECORD, PLAY BACK DATA
10-10
How to backup the data to the internal memory automatically
1. Press the MENU key to open the main menu.
2. Select [3. USB/INTERNAL MEMORY MANAGEMENT].
3. Select [7. AUTO BACKUP].
4. Select [INTERNAL MEMORY].
5. Select [YES].
6. Press the
DISP key to close the menu. Whenever turning the power on, the data
is automatically saved to the internal memory.
Note: When setting [INTERNAL MEMORY] in the [AUTO BACKUP] menu to [YES],
the backup starts after the “attention” screen disappears at the start-up. A message
about “backup in progress” appears while backup is being done.
10.4.2 How to backup the data manually
There are two manual backup methods:
• Backup by a USB flash memory
• Backup by the internal memory
How to backup the data to a USB flash memory manually
1. Connect a USB flash memory in the USB drive.
2. Press the
MENU key to open the main menu.
3. Select [3. USB/INTERNAL MEMORY MANAGEMENT].
4. Select [8. SAVE BACKUP DATA].
5. Select [1. SAVE TO USB MEMORY]. The following message appears.
6. Select [RUN] to backup the data. The message "TRANSFERRING. PLEASE
WAIT." appears.
7. After the message "TRANSFER COMPLETED" appears, push the ENTER knob.
8. Press the DISP key to close the menu.
How to backup the data to the internal memory manually
1. Press the MENU key to open the main menu.
2. Select [3. USB/INTERNAL MEMORY MANAGEMENT].
3. Select [8. SAVE BACKUP DATA].
OVERWRITE BACKUP DATA ALREADY ON USB.
ARE YOU SURE?
㻾㼁㻺䚷䚷䚷㻌㻌㻌㻌㻌 㻯㻭㻺㻯㻱㻸