Furuno GP-3700F, Operator'S Manual

Page: 106 / 224

8. ALARMS
8-6
8.7 Trip Range Alarm
The trip range alarm informs you when you have traveled a certain distance.
1. Press the MENU key to open the main menu.
2. Select [6. ALARM SETTINGS].
3. Select [TRIP RANGE ALARM] on page 1.
4. Select [ON].
5. Select [ALARM RANGE].
6. Press the numeric keys to enter the alarm range (setting range: 0.1 to 9999.9 NM).
7. Press the
DISP key to close the menu.
To deactivate an alarm, select [OFF] at step 4.
How to reset the trip range
1. Press the MENU key to open the main menu.
2. Select [6. ALARM SETTINGS].
3. Select [TRIP RANGE RESET] on page 1 to show the following message.
4. Select [RUN] to reset the trip range.
5. Press the
DISP key to close the menu.
8.8 Water Temperature Alarm
The water temperature alarm requires a water temperature sensor, and comes in two
types: [WITHIN RANGE] and [OUT OF RANGE]. The [WITHIN RANGE] alarm sounds
when the water temperature is within the range set, and the [OUT OF RANGE] alarm
sounds when the water temperature is higher or lower than the range set.
1. Press the MENU key to open the main menu.
2. Select [6. ALARM SETTINGS].
SET TRIP METER TO ZERO.
ARE YOU SURE?
RUN CANCEL