Furuno FAR-2827W, Installation Manual

Page: 28 / 156

1. MOUNTING
1-18
1. Prepare a cutout in the mounting location as shown in the figure below.
388 150
±
2
170
±
2 176
±
2
±
2
For RCU-014 For RCU-015 and RCU-016
2. Set the control unit to the cutout.
3. Screw four wing bolts into hex. nuts.
4. Screw the above wing bolts into mounting plates.
5. Attach the mounting plate to the control unit with four screws (M4x12, supplied with the
control unit) from the bottom side.
6. Fasten four wing screws, and then fasten hex. nuts to fix four wing screws.
#100
(P)
A
#70
53
92
#100
(P)
A
#70
171
53
86
P: Thickness (Max. 10 mm)
RCU-014 RCU-015/016