Furuno FAR-2827W, Installation Manual

Page: 23 / 156

1. MOUNTING
1-13
Panel hook
Panel cover
Fixing screw
Attaching panel hook and panel cover
Note: If you need to remove the monitor unit from the panel, remove the four panel covers
with your fingernail and use two panel hooks supplied as accessories to lift the
monitor unit.
Desktop mounting
Use the optional accessories to mount the monitor unit on a desktop.
•
Necessary parts: FP03-09830 (Code No.: 008-536-020)
Name Type Code No. Qty Remarks
Hanger L 03-163-1111-0 100-305-141 1
Hanger R 03-163-1112-0 100-305-181 1
Hanger stay 03-163-2071-0 100-305-371 1
Hole plug CP-30-HP-13 000-160-074-10 2
Plastic rivet KB-13 Rivet Black 000-570-276-10 4
Hex. bolt M6x25 000-162-949-10 4
Hex. bolt M10x30 000-162-884-10 2
Spring washer M10 000-864-261 2
Flat washer M10 000-864-131 2
1. Assemble two hangers and hanger stay with two hex bolts (M10x30), flat washers and
spring washers and cover each hex bolt with hole plug.
2. Fix the above assembly to the mounting location with four hex bolts (M12, dockyard
supply).
3. Fasten the monitor unit to the mounting hanger assembly with four hex bolt (M6x25,
supplied).
4. Cover each hex bolts with panel cover.
5. Cover each holes for hand grip on the hangers with plastic rivet (4 pcs).