Furuno FAR-2107(-BB), Operator'S Manual

Page: 32 / 312

1. RADAR OPERATION
1-10
[CURSOR MENU]
2
TARGET DATA & ACQ/
TARGET CANCEL/
TT TGT DATA & ACQ/
TARGET TRACK ON*
1 /
TARGET TRACK OFF* 1 /
REF MARK/
EBL OFFSET/
OFFCENTER/
ZOOM/
MARK DELETE/
OWN TRACK DELETE/
TGT TRACK DELETE*1/
CHART ALIGN
TRAIL ERASER*
1 , * 2 /
8
9 CURSOR*
1 , * 2
SMALL/LARGE
*
1
Not available on IMO type
*
1
Not available on A type
1.6 Cursor Menu
Functions that require the use of the cursor, such
as EBL offset and zoom, may be activated directly
from the guidance box or from the CURSOR menu,
either method with the cursor inside the effective
display area. Below is the procedure for choosing a
cursor-related function from the CURSOR menu. In
later sections only the procedure for selection from
the guidance box is given.
1. Put the cursor inside the effective display area.
2. Roll the scrollwheel to show "TARGET DATA &
ACQ / CURSOR MENU" in the guidance box.
3. Push the right button to show the CURSOR
menu.
4. Select "2" then push the left button.
5. Select function desired then push the left
button.
Note: For operation from the keyboard, you may
press the [2] key to select a function in
top-to-bottom order or the [8] key to select in reverse order.
Cursor Menu item Description
TARGET DATA & ACQ TT: Acquires target; displays data for selected tracked target.
AIS: Activates sleeping AIS target; display data for selected AIS
target.
TARGET CANCEL TT: Cancels tracking on selected tracked target.
AIS: Sleeps selected AIS target.
TT TARGET DATA & ACQ Acquires selected echo as tracked target.
TARGET TRACK ON
Turns track for TT/AIS on.
TARGET TRACK OFF Turns track for TT/AIS off.
REF MARK Inscribes reference mark, for target-based speed input.
EBL OFFSET Offsets EBL to measure range and bearing between two targets.
OFF CENTER Shifts screen center to selected location.
ZOOM Zooms selected location.
MARK DELETE Deletes selected mark (plotter mark, origin mark or waypoint
mark).
OWN TRACK DELETE Deletes own ship’s tracks.
TGT TRACK DELETE Deletes other ship’s tracks.
CHART ALIGN Aligns chart with radar picture.
TRAIL ERASER Erases trails. (A, B and C types)
CURSOR SIZE Selects cursor size. (A, B and C types)
6. The guidance box shows "XX / EXIT." (XX = function selected). Use the
trackball to put the cursor where desired.
7. Push the left button to execute the function selected at step 5.
8. To quit the function selected, push the right button when the guidance box
shows "XX / EXIT." (XX = function selected at step 5)