Furuno FA-150, Installation Manual

Page: 161 / 216

U
lstein Power & Control AS
This document and its content is the property of ULSTEIN. Non-
public information contained herein shall be treated as
Confidential Information. No use, copying, citation or publication
of this document or its content is permitted without prior written
consent from ULSTEIN. Any conflicts arising from unauthorized
use shall be governed by the laws of Norway.
File Name:
BRI-D32004-01II (D)
System Installation
Manual.doc Page:
Page 31 of
56
If ports of higher priority get data again (here PortO), the settings get automatically back to the
port of highest priority receiving valid data.
To enable Redundancy, check the On/Off checkbox {1).
Set the backup port number in the field (2).
If you want to define filters, check the checkbox "Sentences on/off' (3), then type the filters you
want to use in the text field (4) and click "Add" (5). To remove a filter that has been set, select it
in the list (6) and click "Delete selected" (7).
Figure 18: Redundancy configuration