Furuno FA-150, Installation Manual

Page: 124 / 216

U
lstein Power & Control AS
This document and its content is the property of ULSTEIN. Non-
public information contained herein shall be treated as
Confidential Information. No use, copying, citation or publication
of this document or its content is permitted without prior written
consent from ULSTEIN. Any conflicts arising from unauthorized
use shall be governed by the laws of Norway.
File Name:
BRI-D32004-01II (D)
System Installation
Manual.doc Page:
Page 52 of
56
VIII. Click
[OK]
to confirm your entries.
Figure 24: Communication Parameters, IP address
2.2.5.2. Configuring a Communication Driver for a USB Link
I. Connect the USB cable (750-923) to a USB port of your PC.
II. Under Windows, you can check which COM port of your PC has been assigned to
the USB cable at:
Start > Settings > Control panel > System
. The "System
Properties" dialog appears.
III. Here, select the tab Hardware and click the button [Device manager] to open the
dialog window for the device manager.
IV. Add the group
Ports (COM and LPT)
to the tree structure. The entry
WAGO
USB Service Cable (COMX) (the designation in parentheses indicates the
assigned COM port; in this example COM27) is given within this group.
Figure 25: WAGO USB service cable (COMX)