56
EN
4
Use [
K
/
L
] to select “Yes”, then
press [OK].
• Press
[
A
OPEN]
on the unit to open the
disc lid.
• Insert the software update disc created
at step 1 and then close the disc lid.
5
After completing loading disc,
confirmation message will appear.
Select “Yes” and press [OK] to start
updating.
• It may take a while to complete the
updating.
6
After the disc update finishes, this
unit will restart.
• Press
[
A
OPEN]
on the unit to open the
disc lid and remove the disc.
Note
• You can check the current software
version in “Current Version” in “Software
Update” menu.
• Please do not disconnect the AC
adapter while executing the “Disc
Update”.
• All settings will remain the same even if
you update the software version.
• After updating finishes, a message will
appear. This message will not be
cleared until the disc is removed from
the unit.
• “Disc Update” is available only when the
AC adapter is connected.
• After the start of “Disc Update”, LCD
screen may become black after a little
while. Please do not try to operate the
unit as updating is still in progress.
(Screen will get back to normal after
updating finishes.)
• While executing the “Disc Update”,
CHARGE indicator and STANDBY/ON
indicator flash alternately.
Network Update
You can update the software by connecting
the unit to the Internet.
1
Follow steps 1 to 4 in “Current
Version” on page 55.
2
Use [
K
/
L
] to select “Network
Update”, then press [OK].
3
Use [
K
/
L
] to select “Yes”, then
press [OK].
• This unit will then start checking for the
latest software version.
4
Confirmation message will appear.
Select “Yes”, then press [OK].
• The unit will start downloading the
latest software version.
5
When the download completes,
confirmation message will appear.
Press [OK].
• The unit will start updating the software
version.
• It may take a while to complete the
updating.
6
After updating finishes, this unit
will restart.
