32
EN
HD Noise Reduction
Reduces the noise of the playback picture.
1
During playback, press [MODE]
repeatedly until
appears.
2
Use [
0
/
1
] to change the setting.
e.g.) DVD-video
HD Noi
s
e Reduction
Off
“Off”
: Shows the original picture as recorded.
“On”
: Executes HD noise reduction which
detects and deletes the noise of the
playback picture.
3
Press [RETURN] to exit.
Note
• The setting will remain the same even if
the unit is turned to the standby mode.
• You cannot adjust the setting during
rapid playback.
Virtual Surround
You can enjoy stereophonic virtual space
through your existing 2 channel stereo system.
1
During playback, press [MODE].
2
Use [
K
/
L
] to select your desired
setting.
Off
“Off”
: No surround effect
“1”
: Natural surround effect
“2”
: Stronger surround effect
3
Press [RETURN] to exit.
Note
• Set the virtual surround setting to “Off” or
lower the volume if the sound is distorted.
• Virtual surround does not function
during rapid playback.
• For the virtual surround, audio signal
will always be 2-channel LPCM.
PIP (BONUSVIEW) Setting
Some BD-video have the PIP function which
enables you to display the secondary video
in the primary video. You can call up the
secondary video by pressing
[MODE]
whenever the scene contains the secondary
video.
secondary
video
primary
video
1
During playback, press [MODE]
repeatedly until the PIP function
appears.
2
Use [
K
/
L
] to select the secondary
video you want.
• The secondary video will be displayed
and the secondary audio will be output.
• Use
[
0
/
1
]
to switch between current
setting and “Off”.
3
Press [RETURN] or [MODE] to
remove the PIP information.
Note
• The secondary audio will not be output
when the secondary audio is set to “Off”
or when “BD Audio Mode” is set to “HD
Audio Output”. Refer to “Switching
Audio Soundtrack” on page 36 and
“Setting the BD Audio Mode” on page 37.
