FUNAI PB1-M200, Owner'S Manual

Page: 15 / 64

15 EN
Standard Video / Audio Connection
R
L
VIDEO IN
AUDIO IN
right side of this unit
AV cable (supplied)
Your TV
• Connect this unit directly to the TV. If the
audio / video cables are connected to a
VCR then the picture may be distorted due
to the copyright protection system.
Finding the Video Channel on Your
TV
After you have completed the connection
with your TV, you must find the correct video
channel (external input channel) on your TV.
1
Press [STANDBY/ON
Q
] to turn on
the unit.
2
Turn on your TV.
3
Press the button on the TV’s remote
control that accesses the external
input channel. It may be labelled
“SOURCE”, “AV”, “AUX” or “SELECT”
(refer to your TV’s user manual).
Note
• If the TV is connected by an HDMI cable,
it may take a while for the opening
picture to come up.
• LCD screen is off when a cable is
connected to AV OUT jack or when
HDMI OUT jack is outputting the
picture.
Network Connection with LAN
By connecting this unit to the Internet, you
can update the software via the Internet or
access the BD-Live and vTuner service.
LAN
WAN LAN
1 2 3 4 5
LAN
Hub or broadband
router
right side of this unit
Networking equipment
(modem, etc.)
Internet
LAN cable (not supplied)
Caution
• Do not insert any cable other than a
LAN cable to the LAN terminal to avoid
damaging the unit.
Note
• After connecting a LAN cable, set up
necessary network settings. (For the
network setup, refer to “Network
Connection” on pages 51-55.)
• For more information about a software
update, refer to “Network Update” on
page 56.
• For more information about BD-Live,
refer to “Enjoying BD-Live Discs with
Internet” on page 33.
• For more information about vTuner,
refer to “Enjoying Internet Radio with
vTuner” on page 38.
• If your network equipment (modem,
etc.) does not have broadband router
functions, connect a broadband router.
• If your network equipment (modem,
etc.) has broadband router functions
but there is no vacant port, add a hub.
• For a broadband router, use a router
which supports 10BASE-T/100BASE-TX
Ethernet standard.
• Do not connect your PC directly to the
LAN terminal of this unit.
• Please purchase shielded LAN cables at
your local store and use them when you
connect to network equipment.