16
EN
LCD Control
You can adjust the pictures on the LCD
screen.
1
Press [LCD].
2
Use [
K
/
L
] to select the desired
setting.
“
” (Brightness) :
Adjusts the brightness level of the picture.
(-7 to +7)
“
” (Contrast) :
Adjusts the contrast level of the picture.
(-7 to +7)
“
” (Sharpness) :
Adjusts the sharpness level of the picture.
(-7 to +7)
“
” (Hue) :
Adjusts the hue (tint) level of the picture.
(-7 to +7)
“
” (Saturation):
Adjusts the colour saturation level of the
picture. (-7 to +7)
“
” (Monitor) :
Turns on (“
“) or off (“
“) the LCD
screen. If you select “
“, the LCD screen
will be turned off after 10 seconds. To
activate the setting immediately, press
[OPTION]
on the unit or
[LCD]
on the
remote control.
3
Use [
0
/
1
] to change the setting.
4
Press [LCD] to exit.
Note
• You can also set the LCD settings in the
setup menu. (Refer to page 43.)
• “LCD Control” is also selectable in the
option menu. To call up the option
menu, press
[OPTION]
on the unit.
(Option menu will differ depending on
the status of playback or playback
media / file.)
• Pressing
[LCD]
does not work while
setup menu is displayed or the unit is
outputting the picture from AV OUT
jack or HDMI OUT jack.
• To turn on the LCD screen when
“Monitor” is set to “Off”, press
[
A
OPEN] / [OPTION]
on the unit or
[LCD]
/
[
C
(stop)]
/
[SETUP]
on the
remote control.
