44
EN
Note for “HDMI Video Resolution”
• Even if you set “HDMI Video Resolution” setting to “Auto”, when this unit is connected to a
DVI compatible display devices with an HDMI-DVI cable, 480p/576p signal will be
output.
• Video and audio signals may be distorted temporarily when switching to / from the
HDMI output mode.
• You cannot change the video resolution during Blu-ray Disc playback. To change the
resolution, stop playback.
• In order to get natural and high quality film reproduction of 24-frame film material, use
an HDMI cable (High Speed HDMI Cable is recommended) and select “Auto” if the
connected TV is compatible with 1080p24 frame input.
• Even if the connected TV is compatible with 1080p24 frame input and you set “HDMI
Video Resolution” setting to “Auto”, when the contents of the disc are not compatible for
1080p24 frame, 1080p60 frame will be output.
• If the picture is not output properly to the TV because of “HDMI Video Resolution”
setting, press and hold
[
1
(play)
]
on the unit for more than 5 seconds. The setting will be
reset to the default automatically.
• With some copy-protected BD-video, the video image may only be output from HDMI
OUT jack.
• Refer also to your TV’s manual.
