Fukuda 8000 Series, Maintenance Manual

Page: 163 / 230

6-3
Chapter 6 Setup Item/Default Value Setup Item
Triplet H, M, L L ○
Couplet H, M, L L ○
R on T H, M, L L ○
Multiform H, M, L L ○
Vent Rhythm H, M, L L ○
Bigeminy H, M, L L ○
Trigeminy H, M, L L ○
Frequent H, M, L L ○
SVT H, M, L L ○
Irregular RR H, M, L L ○
Prolonged RR H, M, L L ○
S Frequent H, M, L L ○
S Couplet H, M, L L ○
VPC L L ○
SVPC L L ○
Pacer Not Capture H, M, L L ○
Pacer Not Pacing H, M, L L ○
Technical GAS Mixed Agents Detection M, L, N N ○
SpO
2
Low Perfusion L, N L ○
Check NIBP cuff, hose M, L, N L ○
NIBP meas. failed. (***-**) M, L, N M ○
Check System Connection. L, N N ○
Chk DS-LAN Comm L, N L ○
Some parameters are not
displayed due to the display
layout setting. L, N, OFF N ○
Check Electrodes H, M, L L ○
Check SpO
2
Sensor Attach. H, M, L L ○
Super Unit Check Conn. M, L M ○
IB-8000 Check Conn. M, L M ○
BIS Sensor Expired N, OFF N ○
BIS Sensor Usage>24 hrs. L, N L ○
BIS SQI <15% L, N L ○
BP Transducer OFF M, L L ○
*1: This setting is selectable only when [Fukuda Tone] is set for "Alarm System".
*2: Set the Alarm Level to [User Setup] before setting the alarm level for each parameter.
*3: When the numeric data acquired from FLOW-i is displayed, alarms cannot be set. Also, these alarms will not generate.
*4: BIS alarm can be set only when the BISx is connected.
Item Description Default Backup