manualshive.com logo in svg

Fukuda 8000 Series, Maintenance Manual

Share
Download
Fukuda 8000 Series Maintenance Manual Download Page 148

5-22

Chapter 5  Initial Settings

User I/F

      NOTE

If there are no lower level items for the selected item, the display will not change.

The lower level items will be displayed.

3

Press 

 for the item to mask.

      NOTE

Only the items with 

 displayed with blue frame can be masked. For the items with 

white frame, display the lower items to perform the mask setting.

Even if the key mask setting is performed for the "Initial Setting", the [Key Mask] key 
cannot be masked.

4

Press 

 for the item to display.

Remote Control Setup

The initial settings for the remote control can be performed.

1

Press the [Menu], [Initial Settings], [User I/F], [Remote Control] keys.

The "Remote Control" menu will be displayed.

2

Set the remote control function.

1

Press the key for F1 to F8 to change the remote control function.

2

3

Summary of Contents for 8000 Series







































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands