Fukuda 8000 Series, Maintenance Manual, Page: 108 / 230

4-16
Chapter 4 Connection to the External Devices Setup for the External Device Connection
Setup for the External Device Connection
This section explains about the external device connection setup.
External Device Setup
1
Press the [Menu], [Initial Settings], [External Device] keys.
 The "External Device" setup menu will be displayed.
1 Select the connecting port for main unit or
HP-800.
2 Select the connecting equipment from the
displayed selection.
By selecting [Vent.], [SvO
2
/CCO], [GAS/
SPIRO], [Other] from the upper area, the
corresponding selection will be displayed at
the lower area.
[Vent.]: SV-900, SV-300, SERVO-i/s,
SERVO-U/n/air, PB, Evita
[SvO
2
/CCO]: Vigilance, PiCCO, PulsioFlex
[GAS/SPIRO]: MGU-800, MGU-810
[Other]: PC Comm., HLX, Barcode, Magnetic
Card, BIS, INVOS, FLOW-i, PC Comm. (DS-5000), TCM4/TCM5
NOTE
 When connecting the cable, make sure that the power of this system and the external device
is turned OFF.
 When the external device setup is changed, make sure that this system and the external
device is properly communicating.
 If communication with the external device is already established through the corresponding
port, it is necessary to disconnect the communication in order to change the selection on this
menu.

When connecting the VELIA, ASTRAL, VS ULTRA, select [SV-900] under [Ventilator].
 The external devices other than Vigilance, BIS, INVOS cannot be set to multiple ports. If the
setting is duplicated, the other port will be automatically set to [OFF].
 If the same external device is set to multiple ports, it may take time to identify the device.

Vigilance, PiCCO, and PulsioFlex cannot be used simultaneously.
 FLOW-i and MGU-800/MGU-810 cannot be used simultaneously.
 FLOW-i and ventilator cannot be used simultaneously.
Selectable External Device for Each Port
Port Selectable External Device
COM1 to
COM4 Vigilance, PiCCO, PC Comm., HLX, Barcode, Magnetic Card, BIS, INVOS, Flow-i, PC Comm. (DS-
5000), PulsioFlex, TCM4/TCM5
Status II SV-900, SV-300, SERVO-i/s, SERVO-U/n/air, Velia, Ultra, Astral, PB, Evita, Vigilance, PiCCO, BIS,
INVOS, FLOW-i
U-LINK MGU-800, MGU-810
HP-800 SV-900, SV-300, SERVO-i/s, SERVO-U/n/air, Velia, Ultra, Astral, PB, Evita, Vigilance, PiCCO, BIS,
INVOS, FLOW-i
2
1