318
Upgrade and Maintenance Manual
TX100
S3
System board and components
Figure 220: Installing the protective socket cover (defective system board) (C)
Ê
Latch the socket lever under the load plate tab.
14.3.5 Concluding steps
Ê
Reconnect all cables to the system board. For a complete cabling overview,
please refer to section
"Cabling overview" on page 322
.
Ê
Reinstall all remaining system board components as shown in the related
sections:
– Heat sinks: refer to section
"Installing the processor heat sink" on
page 226
– Memory modules: refer to section
"Installing a memory module" on
page 205
I
Install all memory modules into their original slots.
– Expansion cards: refer to section
"Expansion cards" on page 150
.
I
Install all expansion cards into their original slots.
– TPM (if applicable): refer to section
"Installing the TPM" on page 293
Summary of Contents for PRIMERGY TX100 S3
