Fujitsu PRIMERGY TX100 S3, Maintenance Manual

Page: 334 / 348

334 Upgrade and Maintenance Manual
TX100 S3
Cabling
15.2.4 Concluding steps
Perform the following procedures to complete the task:
Ê
Close the side cover as described in section "Installing the side cover" on
page 58 .
Ê
Reconnect the AC power cord to the power supply unit and secure it with a
cable tie as described in section
"Connecting the server to the mains" on
page 59 .
15.3 Replacing the front USB cable
15.3.1 Required tools
●
Preliminary and concluding steps:
– Phillips PH2 / (+) No. 2 screw driver
●
Replacing the power cable: tool-less
15.3.2 Preliminary steps
Before replacing the power cable, perform the following steps:
Ê
Shut down the server as described in section "Shutting down the server" on
page 42 .
Ê
Remove the AC power cord from the cable tie and disconnect it from the
system as described in section
"Disconnecting power cord" on page 43 .
Ê
Open the side cover as described in section "Removing the side cover" on
page 45 .
Ê
Remove the HDD cage as described in section "Removing the HDD cage"
on page 61 .