TX100 S3
Upgrade and Maintenance Manual
17
1
Introduction
This Upgrade and Maintenance Manual provides instructions for the following
procedures:
●
Upgrading the server configuration by adding optional hardware
components
●
Upgrading the server configuration by replacing existing hardware
components with superior ones.
●
Replacing defective hardware components
This manual focuses on on-site maintenance tasks. It is recommended to
prepare each service assignment following remote diagnostics procedures, as
described in the "ServerView Suite Local Service Concept (LSC)" manual (see
section
"Documents you need at hand" on page 27
.
V
CAUTION!
The document at hand comprises procedures of a wide range of
complexity. Check the profile of qualification for technicians before
assigning tasks. Before you start, carefully read
"Classification of
procedures" on page 22
.
Summary of Contents for PRIMERGY TX100 S3
