Fujitsu PRIMERGY TX100 S3, Maintenance Manual

Page: 300 / 348

300 Upgrade and Maintenance Manual
TX100 S3
System board and components
Figure 207: Removing the TPM
Ê
Locate the slotted lower end of the TPM screw (1).
Ê
Carefully loosen the TPM screw using a thin slotted screw driver (e.g.
watchmaker's screw driver) or the dedicated TPM screw driver (Japanese
market) (2).
V
CAUTION!
Ensure to turn the screw clockwise in order to remove it!
Slowly and carefully increase the pressure on the screw until it begins
to turn. The effort when loosing the screw should be as low as
possible.
Otherwise the thin metal bar may break, rendering it impossible to
loosen the screw.
Ê
Remove the TPM screw.
Ê
Remove the defective TPM on the upper side of the system board.
0
/