Fujitsu PRIMERGY TX100 S3, Maintenance Manual

Page: 299 / 348

TX100 S3
Upgrade and Maintenance Manual 299
System board and components
Ê
Disable TPM in the system board BIOS. Proceed as follows:
Ê
Switch on or restart your server.
Ê
As soon as the startup screen appears, press the
[F2]
function key to
enter the BIOS.
Ê
Select the Advanced menu.
Ê
Select the Trusted Computing submenu.
Ê
Set the TPM Support and TPM State settings to Disabled .
Ê
Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify
settings, refer to the "System Board D3009 BIOS Setup Utility"
reference manual available online at
http://manuals.ts.fujitsu.com
(EMEA market) or
http://jp.fujitsu.com/platform/server/primergy/manual/
(Japanese market) or from the ServerView Suite DVD 2 supplied with
your PRIMERGY server.
Ê
Shut down the server as described in section "Shutting down the server" on
page 42 .
Ê
Remove the AC power cord from the cable tie and disconnect it from the
system as described in section
"Disconnecting power cord" on page 43 .
Ê
Open the side cover as described in section "Removing the side cover" on
page 45 .
Ê
Remove the HDD cage as described in section "Removing the HDD cage"
on page 61 .
14.2.2.3 Removing the TPM
Ê
Remove the system board as described in section "Removing the system
board" on page 306 .
Ê
Lay the system board on a soft, antistatic surface with its component side
facing down.