150
Upgrade and Maintenance Manual
TX100
S3
Expansion cards and backup units
9.2
Expansion cards
9.2.1
Installing expansion cards
9.2.1.1
Required tools
●
Preliminary and concluding steps: tool-less
●
Installing expansion cards: tool-less
●
Mounting slot brackets:
– Phillips PH2 / (+) No. 2 screw driver
9.2.1.2
Preliminary steps
Before installing an expansion card, perform the following steps:
Ê
Disable BitLocker functionality as described in section
"Disabling BitLocker
functionality" on page 69
.
Ê
Shut down the server as described in section
"Shutting down the server" on
page 42
.
Ê
Remove the AC power cord from the cable tie and disconnect it from the
system as described in section
"Disconnecting power cord" on page 43
.
Ê
Bring the server to its horizontal position.
Ê
Open the side cover as described in section
"Removing the side cover" on
page 45
.
Upgrade and Repair Units (URU)
Average hardware task duration: 5 minutes
Average software task duration: 5 minutes
Summary of Contents for PRIMERGY TX100 S3
