Fujitsu PRIMERGY RX300 S8, Upgrade And Maintenance Manual, Page: 434 / 502

434 Upgrade and Maintenance Manual
RX300 S8
System board and components
14.6.2 Removing the defective system board
Ê
Remove all cables from the system board.
Ê
Remove the following components from the system board as shown in the
related sections:
– Heat sink: see section "Removing processor heat sinks" on page 291
I
Leave the processor on the defective board for now.
– Memory modules: see section "Removing memory modules" on
page 256
I
Ensure to take note of the memory modules’ mounting positions
for reassembly.
– Expansion cards: see section "Removing expansion cards" on page 185
I
Ensure to take note of the controllers’ mounting positions and
cable connections for reassembly.
– UFM: see section "Removing the UFM" on page 406
– onboard SAS enabling key: see section "Removing the onboard SAS
enabling key" on page 428
– SAS RAID controller: see section "Removing the SAS RAID controller"
on page 193