Fujitsu Primergy RX100 S2 User Manual Download Page 76

Page: 76 / 275

Chapter 3 OS Installation Using ServerStart

3.2.4 Starting OS Installation

Install the OS to the server using the created configuration file.

During installation, do not use the mouse or keyboard unless it is necessary for installation operations.

Otherwise, installation may fail.

Turn on the server and insert the ServerStart CD-ROM immediately.

A message prompting you to insert the ServerStart floppy disk appears.

Insert the ServerStart floppy disk containing the created configuration file and

click [OK].

Set the ServerStart floppy disk in the write-enabled state. If it is write protected, installation will
fail.

The [ServerStart Unattended Mode] window appears.

Summary of Contents for Primergy RX100 S2




















































































































































































































































































Search results

Summary of Contents for Primergy RX100 S2

Reviews:

Related manuals for Primergy RX100 S2

Brands by name

Popular brands

Fujitsu Primergy RX100 S2, User Manual

Search results

Summary of Contents for Primergy RX100 S2

Reviews:

Related manuals for Primergy RX100 S2

Brands by name

Popular brands