Fujitsu Primergy RX100 S2 User Manual Download Page 54

Page: 54 / 275

Chapter 3 OS Installation Using ServerStart

3.1 Guided mode

In guided mode, follow the wizard to specify hardware configuration and the OS to be

installed, save the information necessary for installation in a configuration file, and

install the OS.

3.1.1 Starting Up the Guided Mode

Start up the guided mode.

Turn on the server and insert the ServerStart CD-ROM immediately.

ServerStart starts up and a message appears prompting you to insert the ServerStart floppy disk.

Insert the ServerStart floppy disk supplied with the server. Make sure that

"Removable media" and "A:" are selected and click [Create].

Set the ServerStart floppy disk in the write-enabled state.

Summary of Contents for Primergy RX100 S2




















































































































































































































































































Search results

Summary of Contents for Primergy RX100 S2

Reviews:

Related manuals for Primergy RX100 S2

Brands by name

Popular brands

Fujitsu Primergy RX100 S2, User Manual

Search results

Summary of Contents for Primergy RX100 S2

Reviews:

Related manuals for Primergy RX100 S2

Brands by name

Popular brands