![background image](http://html.mh-extra.com/html/fujitsu/primergy-rx100-s2/primergy-rx100-s2_user-manual_121067181.webp)
181
PRIMERGY RX100 S2 User’s Guide
7
In
st
al
ling
Interna
l O
ptio
ns
■
SCSI-ID Setting of Internal Hard Disk Unit
The internal hard disk unit does not support hot-swapping. As the SCSI-ID is not set automatically, you
must set it up in advance by referring to the followings.
●
Jumper Pin Locations of the Internal Hard Disk Unit
Set the SCSI-ID of the hard disk unit using the jumper pins on the rear side of the hard disk.
●
SCSI-ID Setting
Set the jumper pins as follows, according to the bay locations.
table: SCSI-ID Set Value for Each Bay Location
Bay 1
Bay 2
SCSI-ID = 0
SCSI-ID = 1
2
4
6
8 10 12 14
1
3
5
7
9 11 13
16 18 20 22 24
15 17 19 21 23
[Rear side of the hard disk]
Jumper pin setting (set at the time of purchase)
Short
2 4 6
1 3 5
2 4 6
1 3 5
Summary of Contents for Primergy RX100 S2
