Fujitsu PRIMEQUEST 2000 Series Tool Reference Download Page 326

Page: 326 / 734

MMB Web-UI (Web User Interface) Operations
1.7 [System] Menu for PRIMEQUEST 2800B2/2800B

325

CA92344-0539-04

TABLE 1.166 Display and Setting items on [SB#x] Window

Items

Description

Board Information
Status

Displays the status of SB.

OK: No fault on the SB.

Not-present: The SB is not mounted.

Warning: Warning is detected by the voltage sensor on the SB.

Degraded: Error has occurred in a component on the SB. However, the SB can be
operated by disconnecting the faulty components.

Failed: A fault has occurred in the SB, and the SB must be disconnected, or the
SB has been disconnected.

Unsupported: In case there is an SB which is not supported by the MMB.

Power Status

Displays the power status of the SB.

On: On status

Standby: Standby status

Part Number

Displays the part number of the SB

Serial Number

Displays the serial number of the SB

Location LED

Indicates the display status of the Location LED.
The display status consists of the following conditions.

On: The light is on

Off: The light is off

On, Off and blinking of the Location LED can be controlled by clicking the respective
[On], [Off], [Blink] buttons.

CPUs
CPU#0
CPU#1

Status

Displays the status of the CPU.

Not-present

Disabled

Warning

Failed

Configuration error

Unknown

Core/Max Core

Displays Normal number of cores number/ maximum number of
cores number.

Indicates the degeneracy status of the core.

Maximum number of cores also includes the number of Disable
cores.

Model

Displays the product name of the CPU.

Stepping

Displays the version number of the CPU.

Part Number

Displays the part number of the CPU.

Serial Number

Displays the serial number of the CPU.

DIMMs

Summary of Contents for PRIMEQUEST 2000 Series































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PRIMEQUEST 2000 Series

Reviews:

Related manuals for PRIMEQUEST 2000 Series

Brands by name

Popular brands

Fujitsu PRIMEQUEST 2000 Series, Tool Reference

Search results

Summary of Contents for PRIMEQUEST 2000 Series

Reviews:

Related manuals for PRIMEQUEST 2000 Series

Brands by name

Popular brands