Fujitsu MHV2040BH, Product Manual, Page: 38 / 276

Device Overview
1-16 C141-E224
Table 1.8 Interface power management
IPM Mode I/F power state Return time to active I/F condition
Active Active State
−
Active
Partial Partial State
5 to 10
µ
s maximum
Power Down
Slumber Slumber State 5 to 10 ms maximum Power Down
1.13 Restriction of Use of Hazardous Substances
The levels of hazardous substances as lead, mercury, cadmium, hexavalent
chromium, PBB and PBDE in use in MHV series have been reduced to comply
with RoHS directive of European Union (without the exemption of RoHS
Directive, see note 1) ).
RoHS Directive = Directive 2002/95/EC of the European parliament and of
the council on the Restriction of the use of certain
Hazardous Substances in electrical and electronic
equipment
Notes:
1) There are some exemption in RoHS directive, for example, Lead in glass
of electronic components.
2) Some particulars under consideration have not determined at present as a
permissible limit of banned materials content in RoHS directive. Such case,
we use the original criterion of Fujitsu limited which is provided under the
reference restrictions already established as ELV (End-of-Life Vehicle)
Directive or an internal environmental low of each countries in EU.