Sense Data and Error Recovery Methods
5-14
C141-C009
5.2 INIT Error Recovery Methods (Recommended)
When a single command or a series of linked commands are not terminated with a
status reported, the INIT should execute error recovery processing corresponding
to the state in which the command was terminated. Here, the procedure for
analyzing the command execution termination state and recommended procedures
for error recovery processing executed by the INIT in accordance with the results
are explained.
5.2.1 Termination status analysis and error recovery methods
Figure 5.1 shows a model of the INIT's general processing flow from issuing of
the command until reception of the termination status.
END
status received ?
Timeout ?
See item (3).
GOOD
TASK FULL
Yes
Yes
Yes
No
No
No
Normal end
To item (1)
To item (2)
Yes
No
Yes
Command issue
PRESERVATION
CONFLICT
To Section 5.2.2
Figure 5.1 Analysis of the termination status
Summary of Contents for MAU3036RC SERIES
