manualshive.com logo in svg

Fujitsu MAU3036RC SERIES, Technical Manual

The Fujitsu MAU3036RC SERIES Product/Maintenance Manual is a comprehensive guide that provides users with all the necessary information for the optimal use and maintenance of their Fujitsu MAU3036RC SERIES product. This manual is available for free download from manualshive.com and ensures hassle-free product understanding and long-term reliability.

Share
Download
background image

Command Specifications 

 

4-20 

C141-C009 

The MODE SELECT parameters include parameters which can be changed by the 
INIT as desired,  parameters which the INIT cannot change, which whose values 
are determined by the IDD unilaterally and parameters which can be changed by 
the INIT within certain appropriate limits.  The IDD also contains parameter fields 
which are applicable for rounding processing ("rounding up" or "rounding down") 
of parameter values specified by the INIT to values which the IDD can use in 
actual operation. 

When changing of parameters other than "variable parameters" is requested by the 
INIT in the MODE SELECT parameters which it transfers in this command, or 
when changes which are outside the permissible range are requested, even though 
they are "variable parameters," this command is terminated with a CHECK 
CONDITION status (ILLEGAL REQUEST [=5] / Invalid field in parameter list 
[=26-00]) and all the parameters specified by the INIT are disabled.  Furthermore, 
parameter fields exist which ignore the values specified by the INIT, even if the 
parameters are "variable parameters."  Details are explained in the description of 
each page descriptor in this item. 

If the IDD performs rounding processing ("rounding up" or "rounding down") of 
parameter values specified by the INIT, in some cases a "CHECK CONDITION" 
status (RECOVERED ERROR [=1] / Rounded parameter [37-00]) is reported, and 
in some cases it is not reported.    

Whether or not the CHECK CONDITION status is reported depends on whether 
"rounding up" or "rounding down" is specified. 

If the INIT would like to confirm that the IDD is implementing rounding 
processing, it issues a MODE SENSE or MODE SENSE EXTENDED command 
after issuing this command and reads the values for the "Current" parameters, then 
compares them with the parameter values sent in the MODE SELECT command. 

Parameter fields which are the object of rounding processing are explained in the 
descriptions of each page descriptor in this item. 

Table 4.13 lists the data configuration of the parameter list transferred by the INIT 
in this command.  The parameter list is configured from header 4 bytes in length 
followed by a block descriptor with a length of 8 bytes.  This is followed by one 
or more page descriptors, or, when there is no block descriptor the 4-byte header 
is followed by one or more page descriptors.  The INIT may transfer a header 
only, or the header and block descriptor only without the page descriptor added. 

Summary of Contents for MAU3036RC SERIES









































































































































































































































































































































































































Reviews:

No comments

Related manuals for MAU3036RC SERIES

Xinje DS3 series servo Manual preview
DS3 series servo
Brand: Xinje Pages: 120
UNI Geräte MG Series Manual preview
MG Series
Brand: UNI Geräte Pages: 14
YASKAWA Varispeed G7 Modbus Communication Manual preview
Varispeed G7
Brand: YASKAWA Pages: 92
YASKAWA GA500 series Technical Manual preview
GA500 series
Brand: YASKAWA Pages: 10
Lenze ESMD Series Manual preview
ESMD Series
Brand: Lenze Pages: 8
Invertek Drives ODE-3-110023-1012 User Manual preview
ODE-3-110023-1012
Brand: Invertek Drives Pages: 40
IEF Werner profiLINE 140 Translation Of The Original Instructions preview
profiLINE 140
Brand: IEF Werner Pages: 48
Motor Power Company DUET AD Installation Manual preview
DUET AD
Brand: Motor Power Company Pages: 23
StepperOnline Y Series User Manual preview
Y Series
Brand: StepperOnline Pages: 5
Mitsubishi FREQROL-SF Troubleshooting Manual preview
FREQROL-SF
Brand: Mitsubishi Pages: 219
Technosoft iPOS4803-SY3 Technical Reference preview
iPOS4803-SY3
Brand: Technosoft Pages: 37
HPI Racing SFL-11MG SERVO Instructions preview
SFL-11MG SERVO
Brand: HPI Racing Pages: 2
GMTCNT GSTD2860 User Manual preview
GSTD2860
Brand: GMTCNT Pages: 2
Danfoss VLT HVAC Drive FC 100 Series Programming Manual preview
VLT HVAC Drive FC 100 Series
Brand: Danfoss Pages: 122
National Instruments NI SMD-7613 Getting Started preview
NI SMD-7613
Brand: National Instruments Pages: 13
Danaher Motion S200-VTS Product Manual preview
S200-VTS
Brand: Danaher Motion Pages: 140
Danfoss VLT CDS 302 Troubleshooting Manual preview
VLT CDS 302
Brand: Danfoss Pages: 18
Fenner QD:HVAC Installation And Operating Instructions Manual preview
QD:HVAC
Brand: Fenner Pages: 20

Brands by name

Popular brands

Load more brands