manualshive.com logo in svg

Fujitsu Lifebook E330, Manual

The Fujitsu Lifebook E330 is an efficient and versatile laptop designed for modern professionals. Unlock its full potential by downloading the comprehensive user manual, available for free at manualshive.com. This manual ensures you make the most out of your device, empowering you with valuable insights and instructions.

Share
Download
background image

U s i n g   Y o u r   L i f e B o o k   E   S e r i e s

L i f e B o o k   E   S e r i e s   f r o m   F u j i t s u

53

Thr

ee

operation automatically. This feature is inde-
pendent of the Suspend/Resume button. This
parameter is enabled and disabled in the BIOS
setup utility.

P O I N T

The Idle mode and Standby mode fea-
tures described above are only available
in Windows 95 and Windows NT.
Windows 98 has its own integrated
power management features that include
the functionality of those listed above.

Video Timeout

The Video Timeout is one of the power man-
agement parameters which saves power by
turning off the display if there is no keyboard
or pointer activity for the user selected timeout
period. Any keyboard or pointer activity will
cause the display to restart automatically. This
feature is independent of the Suspend/Resume
button. This parameter is enabled and disabled
in the BIOS setup utility.

(See page 108

.

)

Hard Disk Timeout

The Hard Disk Timeout is one of the power
management parameters which saves power 
by turning off the hard drive if there is no hard
drive access for the timeout period which has
been set in the BIOS setup utility.

(See page

108.)

Any attempt to access the hard drive will

cause the hard drive to restart automatically.
This feature is independent of the Suspend/
Resume button. This parameter is enabled and
disabled in the BIOS setup utility.

Windows Power Management 
Control Panels

The Power Management icon in the Windows 98
Control Panel allows you to configure some of
the power management settings that are normal-
ly controlled by the BIOS. For instance, you can
set timeout values in the Power Management
Control Panel for turning off the display and for
turning off hard disks. You can specify these
timeout values based on whether you are run-
ning on batteries or AC.

The Power icon in the Windows 95 Control
Panel will allow you to set timeout values for
the hard drive only.

ACPI and Windows 98

Short for Advanced Configuration & Power
Interface, a power management specification
developed by Intel, Microsoft, and Toshiba.
ACPI, which is part of the Windows 98 
operating system, enables the operating system
to control the amount of power given to each
device attached to the computer. With ACPI,
the operating system can turn off peripheral
devices, such as CD-ROM players, when they
are not in use.

Due to ongoing industry development of
ACPI technology, we have configured your
LifeBook E Series notebook to APM
(Advanced Power Management) mode.

F Three Using.qxd  10/28/98  10:15 AM  Page 53

Summary of Contents for Lifebook E330



























































































































































































































Reviews:

No comments

Related manuals for Lifebook E330

Acer Swift 3 SF314-59 User Manual preview
Swift 3 SF314-59
Brand: Acer Pages: 85
Acer PREDATOR TRITON 300 SE User Manual preview
PREDATOR TRITON 300 SE
Brand: Acer Pages: 97
Acer AN515-57-72SA User Manual preview
AN515-57-72SA
Brand: Acer Pages: 78
Acer TravelMate 7750G User Manual preview
TravelMate 7750G
Brand: Acer Pages: 2286
Dell Latitude 13 Education Series Technical Manualbook preview
Latitude 13 Education Series
Brand: Dell Pages: 42
Dell Inspiron P10F002 Quick Start Manual preview
Inspiron P10F002
Brand: Dell Pages: 18
Hitachi M300N Service Manual preview
M300N
Brand: Hitachi Pages: 102
NEC Generation N3000 M760s User Manual preview
Generation N3000 M760s
Brand: NEC Pages: 126
NEC VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION Service Manual preview
VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION
Brand: NEC Pages: 114
Acer Aspire 5730ZG Series Quick Manual preview
Aspire 5730ZG Series
Brand: Acer Pages: 15
Acer Aspire 5542G Series Replacement Manual preview
Aspire 5542G Series
Brand: Acer Pages: 5
Acer Aspire 5536 Specifications preview
Aspire 5536
Brand: Acer Pages: 7
Acer Aspire 5530 Series Quick Manual preview
Aspire 5530 Series
Brand: Acer Pages: 15
Acer Aspire 5315 Specifications preview
Aspire 5315
Brand: Acer Pages: 5
Acer Aspire 5600 Series User Manual preview
Aspire 5600 Series
Brand: Acer Pages: 103
Acer ASPIRE 5570 User Manual preview
ASPIRE 5570
Brand: Acer Pages: 107
Acer Aspire 5560 Series Service Manual preview
Aspire 5560 Series
Brand: Acer Pages: 112
Acer Aspire 5670 User Manual preview
Aspire 5670
Brand: Acer Pages: 121

Brands by name

Popular brands

Load more brands